cosmoteer-pressure-relief-radiator/components/thermal_battery_vent.rules

// ABOUT ME
// Components merged into the Thermal Battery. The battery is the ship's heat
// gauge, so it is what decides whether the heat network has surplus worth
// venting, and broadcasts that decision to every radiator on the network.
//
// The broadcast is a NetworkValue carrying 1 (hold) or 0 (vent), not a
// NetworkToggle. Every NetworkToggle in vanilla sets IncludeInPhysical = false
// -- they exist only for blueprint stat display and do not carry a signal on a
// real ship. NetworkValue has no such restriction and is what the thermal
// amplification pump uses to drive actual physical behaviour.
//
// Polarity is deliberate: the battery broadcasts "HOLD", not "vent". A ship
// with no thermal battery has no broadcaster, every radiator reads 0, and
// radiators behave exactly as in vanilla.
//
// Heat storage fullness causes no damage on its own -- damage only occurs when
// the network refuses heat and it overflows onto the producing part
// (base_part_overclock.rules: HeatDistributionStorage adds InOrder, network
// first, OverflowHeatStorage second). So the band sits high on purpose, keeping
// the network full as a deep ammunition reserve for Thermal Canister Missiles.
//
// All names are prefixed to avoid colliding with vanilla component names.

// Vent when the battery is essentially full.
AutoRad_VentCeiling
{
	Type = ThresholdToggle
	ValueFrom = HeatStorage
	MinAmount = 98%
}

// Stop venting once there is real headroom again.
AutoRad_VentFloor
{
	Type = ThresholdToggle
	ValueFrom = HeatStorage
	MaxAmount = 94%
}

AutoRad_CeilingTrigger
{
	Type = ToggleTrigger
	Toggle = AutoRad_VentCeiling
	TriggerWhenOn = true
	TriggerWhenOff = false
}

AutoRad_FloorTrigger
{
	Type = ToggleTrigger
	Toggle = AutoRad_VentFloor
	TriggerWhenOn = true
	TriggerWhenOff = false
}

// The deadband: latches on at the ceiling, stays on until the floor is reached.
// Without this the radiators would chatter on and off at the threshold.
AutoRad_VentLatch
{
	Type = TriggeredToggle
	OnTrigger = AutoRad_CeilingTrigger
	OffTrigger = AutoRad_FloorTrigger
}

// OR the raw ceiling back in, so a ship that loads already above the ceiling
// vents immediately instead of waiting for a threshold crossing that never comes.
AutoRad_VentActive
{
	Type = MultiToggle
	Toggles = [ AutoRad_VentLatch, AutoRad_VentCeiling ]
	Mode = Any
}

AutoRad_One  { Type = StaticValue; Value = 1 }
AutoRad_Zero { Type = StaticValue; Value = 0 }

// 1 while the network should hold its heat, 0 while it should vent.
AutoRad_HoldValue
{
	Type = ToggleValueSelector
	Toggle = AutoRad_VentActive
	ToggleOnValue = AutoRad_Zero
	ToggleOffValue = AutoRad_One
}

AutoRad_NetworkedHold
{
	Type = NetworkValue
	ValueSource = AutoRad_HoldValue
	Categories = [ auto_radiator_hold ]
	IncludeInBlueprints = false
}